Summary, Conclusions, and Recommendations
Civil engineers have responsibilities for the planning, design, construction, operation and maintenance of physical infrastructures. These infrastructures include all types of buildings,...
Extreme Wave-Force Calculation Procedure for 20th Edition of API RP-2A
The paper describes the revised guideline design wave force calculation procedure approved for the 20th edition of the API-RP2A WSD and the first edition of the API-RP2A LRFD and contrasts...
Selected Coastal Engineering Papers of Robert L. Wiegel
Civil Engineering Classics
Sponsored by the Coastal Zone Management Committee of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This collection contains 54 papers and...
Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Four
Prepared by the Subcommittee on Offshore Technology Conference Support of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...
Dilatometers Settle In
(Originally published in
Effects of Impervious Area Estimation Methods on Simulated Peak Discharges
The variability of simulated flood discharges is evaluated using two methods for estimating impervious surfaces and common design methods in the Mission Creek watershed (31 sq km) located...
Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Three
Prepared by the Subcommittee on Offshore Technology Conference Support of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...
Lessons Learned from the December 26, 2004 Sumatra Quake and Tsunami
On December 26, 2004, a devastating earthquake occurred off the western coast of Sumatra, Indonesia, creating seismic and tsunami waves felt by people who live around the Indian Ocean....
Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Two
Prepared by the Program Committee, Offshore Technology Conference, of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...
Celerity: Wave Action
This chapter discusses the tabulation of wave action data in Microsoft Excel....
Outdoor Human Comfort and Its Assessment
Prepared by the Task Committee on Outdoor Human Comfort of the Aerodynamics Committee of ASCE. This report describes state-of-the-art methods for assessing...
Berm Breakwaters?Design, Construction and Monitoring
The philosophy of the fieldwork of Berm breakwaters was applied in Iceland. A few case histories were described with emphasis on quarry investigations, design, construction and monitoring....
Comparison of Hydrodynamic Parameters for a Floating Breakwater
The U. S. Army Engineer Research and Development Center is in the process of developing a Rapidly Installed Breakwater System (RIBS) for use in Joint Logistics Over the Shore Operations...
Montioring and Modeling of Tandem Breakwater System at Hammond, IN
A tandem breakwater system was constructed in 1989-90 to provide protection for a large marina at Hammond, IN, at the south end of Lake Michigan. A five year monitoring program (1993-98),...
Advances in Buoy Technology for Wind/Wave Data Collection and Analysis
Considerable advances have been made recently to reduce the cost of gathering meteorological and oceanographic data from coastal waters, especially for meteorological and oceanographic...
Depth Measurement Using Remotely Sensed Data, Specifically A
The compact airborne spectrographic imager (casi) is what is referred to as an imaging spectrometer. This is an optical device that is mounted on an aircraft and used to collect high resolution...
St. George Habor?Berm Breakwater Construction Considerations
During the period 1984-1987 three berm breakwaters with a total length of approximately 800 meters were constructed at St. George Harbor on St. George Island in the Pribil of Chain of...
Application of a SonTek Argonaut Side-Looking (SL) Doppler Flow Meter for Measuring Discharge on the Southern Leg of the Parana' River at the Entrance to the Itaipu Binacional Reservoir, Parana', Brasil
Index-velocity and water level data collected with a SonTek Argonaut Side-Looking (SL) Doppler Flow Meter and channel cross-sectional area data were used to compute total discharge on...
Turbulence, Bottom Boundary Conditions, and Sediment Transport in a Shallow Water Habitat
Field experiments were designed to explore the effects of vegetation on the hydrodynamics and sediment transport in Franks Tract, a shallow water habitat in the Sacramento-San Joaquin...
Calibration of Water-Velocity Meters
The U.S. Geological Survey (USGS), as part of its responsibility to appraise the quantity of water resources in the United States, maintains facilities for the calibration of water-velocity...
Return to search